Product name: jig machine.
Application:For separation placer gold/alluvial gold, tungsten,iron, tin, hematite, copper, tantalum niobium, titanium, manganese, barite, zirconium, chrome and gemstone/diamond etc.
Feeding size:0-20mm.
Capacity: 20tons per hour one set.
Our Saw-tooth Wave Jig Machine is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig Machine. The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.
Industrial tests carried our of Saw-tooth Wave Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw-tooth Wave Jig is raised by Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%; The water consumption reduces 30%-40% than traditional Jig. The area reduces 1/3 and the stroke may adjust.
Feature
u High capacity
u High concentration ratio and high recovery
u Fabricated with highest quality material
u Easy to install, operate and maintain
u The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
u Saving water 30-40% than ordinary jig
u The pulsation speed very easy adjusted by regulator
u Suitable for roughing and cleaning
u Can achieve a good result in processing such as placer gold, tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.
Jig machine
Main Technical Parameters
Model | Jig hutch | Diaphragm | Feeding size (mm) | Amount of make-up water (m3/t) | Make-up water pressure (Mpa) |
Capacity (t/h) | Power (kw) | Dimensions (mm) | Weight (Kg) | ||
Shape | Area (m2) | Stroke (mm) | Frequency of stroke (r/min) | ||||||||
JT0.57-1 | Trapezoid | 0.57 | 8.5—12 10—17 12-21 | 80-180 | <6 | 1-2 | ≥0.05 | 1.5-3 | 1.5 | 1550×780×1530 | 610 |
JT1-1 | Trapezoid | 1.04 | <10 | 2-3 | 2.5-5 | 2.2 | 2270×1110×1890 | 900 | |||
JT2-2 | Rectangle | 2.28 | <10 | 2-4 | 5-10 | 3 | 3225×1550×2050 | 1640 | |||
JT3-1 | Trapezoid | 3 | 12-30 | 50-125 | <10 | 3-6 | 7.5-15 | 5.5 | 2745×2000×3030 | 3085 | |
JT4-2 | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 7.5 | 4240×1990×2750 | 3098 | ||
JT4-2S | Rectangle | 4 | 25-57 | <25 | 4-8 | 8-20 | 4×2 | 4240×1990×2750 | 4000 | ||
JT5-2 | Trapezoid | 4.86 | 12-30 | <10 | 3-6 | 12-25 | 7.5 | 4081×2202×2639 | 4500 | ||
Jig machine working principle/How does jig machine work?
Jig separator as gravity separator,no need any chemical,just use water for washing.use iron ore as bed stone as seperation medium.heavy mineral will through iron ore through screen as concentrate,light mineral will flow to tailing discharge.
feeding ore from feeding box, the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials. The minerals with small density will be in the up layer and will flow together with the up pulp flow while material with bigger density will be in the down layer and will discharged from the down discharging port as jig machine concentrate.
Популярні Мітки: золото алмаз джиг машина джиг сепаратор гірничодобувне обладнання, Китай, постачальники, виробники, фабрика, на замовлення, оптом, ціна, на продаж
